• A maximum lifting capacity of 22,400 lbs. (2.5:1 factor of safety).
• Made in the U.S.A. with high strength, low alloy CMC steel.
• Assembled and ready to use with void-former and base attached.
• Available for both face lift and edge lift applications.
• Features notches for rebar tying.
• An easy to use double bar is available for double insert requirements
• May contribute to LEED® points in green building applications.

Gyro Tilt Plus- Non Directional System

• The Dayton Superior T-49 Gyro Tilt Plus Face Lift Insert is a 3/4” diameter insert manufactured from high quality steel.
• The hot forged head is engaged by the system hardware.
• The insert assembly is complete with plastic void and plastic protected wire base.
• The insert assembly is easily positioned and tied to the rebar mat and requires no special orientation.
• SWL provides a safety factor of approximately 2 to 1 in 2,500 psi weight concrete.