Shepler's Performance Products

Technical Data Sheet | MSDS | LEED Letter

Shep 1107 Premium Grout is designed for critical use where high strength, non-staining characteristics and positive expansion aret required. It contains only natural aggregate and an expansive cementitious binder. It is extremely flowable, and when cured, appears similar in appearance to concrete.

^ Back to Top

Joint Sealants

SHEP Silicone Select

Technical Data Sheet | MSDS

Shep Silicone Select is a low modulus silicone. Shep Silicone Select offers the performance and durability characteristics of conventional non-sag silicone with the ease of installation of self-leveling materials.
Shep Silicone Select is supplied as ready to use one component moisture curing system which provides a lasting and flexible seal.

SHEP SELECT SELF-LEVELING

Technical Data Sheet | MSDS | LEED Letter

Shep Select Self-Leveling is a one part urethane sealant for sealing and protecting moving joints of all types.

SHEP SELECT NON-SAG

Technical Data Sheet | MSDS | LEED Letter

Shep Select Non-Sag is a one part urethane sealant for sealing and protecting moving joints of all types.

^ Back to Top

Epoxies

SHEP POXY HI MOD GEL

Technical Data Sheet | MSDS | LEED Letter

Shep Poxy Hi Mod Gel is a multi-purpose, two component, 100% solids, moisture tolerant epoxy resin compound for load bearing applications.

SHEP POXY HI MOD FAST GEL

Technical Data Sheet | MSDS | LEED Letter

Shep Poxy Hi Mod Fast Gel system is a two part, 100% solids, moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a gel consistency. Shep Poxy Hi Mod Fast Gel products are high strength, extremely fast setting (even in a thin film) adhesives and can be used at temperatures as low as 35°F (2°C).

^ Back to Top

Patching Materials

SHEP PATCH PLUS

Click here for Documentation

Shep Patch Plus is a two component polymer modified concrete repair and underlayment material. The Shep Patch Plus liquid is a high solids content acrylic polymer. The Shep Patch Plus Powder is a Portland cement based mix with graded silica and special chemical additives. Polymer modified concrete gives improved bonding, improved chemical resistance, improved water resistance and improved tensile, compressive and flexural strength.

SHEP CRETE

Click here for Documentation

Shep Crete is a Portland Cement-based product with graded silica aggregates and special chemical additives for bonding, hardening and moisture retention. It is formulated for smoothing, rubbing and thin coat patching applications. Shep Crete has a smooth, rich texture making it simple and easy to apply. After curing, it is not water sensitive, it has the setting and curing properties of regular concrete.

SHEP DAMM-IT

Technical Data Sheet | MSDS | LEED Letter

Shep Damm-It is a quick setting hydraulic cement compound used to instantly stop running water or seepage leaks in masonry or concrete. Shep Damm-It is ready to use and requires only the addition of water before plugging and sealing cracks.

SHEP ROCK

Click here for Documentation

Shep Rock is a scientifically formulated non-metallic pourable anchoring cement and grout. It is rapid setting and expansive. Shep Rock is a non-shrink hydraulic cement with controlled expansion. It will self level when mixed with water to a pourable consistency. Shep Rock is non-rusting and contains no ferrous metals. Its controlled expansion grips the material to be anchored, locking it into place.

SHEP WELD

Click here for Documentation

Shep Weld is a non-reemulsifiable architectural quality acrylic latex emulsion for interior or exterior use as a bonding agent admixture for concrete repair, leveling, grouts, thin sets and mortar beds or rubbing applications. It is suitable for making repairs above and below grade.

SHEP WELD PLUS

Click here for Documentation

Shep Weld Plus is a ready use, film forming, one-time re- emulsifiable liquid bonding agent and polymer modifier for concrete. It may be used inside or outside as a bonding agent admixture for concrete repair, leveling, grouts, thin sets and mortar beds or rubbing applications. Shep Weld Plus is an excellent surface bonder and may be used above or below grade.

^ Back to Top

Cures & Sealers

SHEP CURE & HARD

Technical Data Sheet | MSDS | LEED Letter

Shep Cure & Hard concrete curing compound was specially formulated to provide the contractor with a good, general purpose curing compound for construction applications where economy is of prime importance. It contains no wax, resin or solvents. Shep Cure & Hard meets maximum VOC content limits of 100 g/L for Concrete Curing Compounds as required by SCAQMD Rule 1113.

SHEP CURE 309 REZ ALL

Technical Data Sheet | MSDS | LEED Letter

Shep Cure 309 Rez All water-based concrete curing compound is formulated from hydrocarbon resins and may be used on interior, exterior, vertical, and horizontal concrete surfaces. Once applied, Shep Cure 309 Rez All forms a liquid membrane that retains an optimum amount of water in freshly placed concrete for complete hydration of the cement.

SHEP CURE 309 CITY WHITE

Technical Data Sheet | MSDS | LEED Letter

Shep Cure 309 City White water-based, white-pigmented concrete curing compound is a waxbased dispersion with selected white pigments. When properly applied, Shep Cure 309 City White forms a premium-grade membrane, which optimizes water retention. The white pigment reflects the sun’s rays to help keep the concrete surface cooler and prevent excessive heat buildup.

SHEP SEAL 1315 UV

Technical Data Sheet | MSDS | LEED Letter

Shep Seal 1315 UV acrylic curing and sealing compound is a clear, transparent, ready-to-apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively cures and seals freshly placed concrete. Shep Seal 1315 UV meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

SHEP SUPER CLEAR COAT

Technical Data Sheet | MSDS | LEED Letter

Shep Super Clear Coat acrylic curing and sealing compound offers a 30% solids content. It is a clear, transparent, ready to - apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively cures and seals freshly placed concrete. Shep Super Clear Coat meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

^ Back to Top

Form Release

SHEP FARM FRESH

Technical Data Sheet | MSDS | LEED Letter

100% natural, organic chemical release agent. Ideal for sensitive environmental situations such as bridge formwork over rivers and streams or potable water reservoirs. Shep Farm Fresh provides quick, easy release and leaves an architectural bondable concrete surface.

SHEP PREMIUM RELEASE

Technical Data Sheet | MSDS | LEED Letter

A general use, premium type release agent for use on steel, aluminum, plywood and composition forms. Composed of organic chemicals that react with the concrete to prevent adhesion and provide quick and easy release. An excellent value for the money. Concrete is left with an architectural surface or ready for application of curing compound or sealer, or bondable for plaster, mastics, paint, etc.

^ Back to Top

Bondbreakers

SHEP CURE & TILT PLUS SB

Technical Data Sheet | MSDS | LEED Letter

Shep Cure & Tilt Plus SB is a reactive and membrane forming bondbreaker for use in tilt wall construction. Shep Cure & Tilt Plus SB is a special formula of polymers and propriety ingredients designed to provide clean, easy lifting of tilt panels. Shep Cure & Tilt Plus SB has a fugitive dye for ease of visual inspection during application and is also available without the dye upon special request.

SHEP CURE & TILT PLUS WB

Technical Data Sheet | MSDS | LEED Letter

Shep Cure & Tilt Plus WB is a long chain chemically reactive bondbreaker for tilt-up construction. Shep Cure & Tilt Plus WB is free of silicones, resins and waxes. Panels will lift clean and free of resin staining. Organic compounds in Shep Cure & Tilt Plus WB react with the free limes in the concrete, producing gels that form a water impermeable barrier.

^ Back to Top

Joint Sealants

Epoxies

Patching Materials

Cures & Sealers

Form Release

Bondbreakers

Search for Products

REQUEST A QUOTE

Get Connected

FEATURED VIDEO

FEATURED PHOTOS

OUR BLOG

CONNECT WITH US

ADMINISTRATIVE OFFICE

VISIT OUR CORPORATE WEBSITE

Products

Rentals

Quick Links