http://www.cmcconstructionservices.com/tilt-up-systems/
Tilt-Up Systems
Power Shep Lift-Directional System
- A maximum lifting capacity of 22,400 lbs. (2.5:1 factor of safety).
- Made in the U.S.A. with high strength, low alloy CMC steel.
- Assembled and ready to use with void-former and base attached.
- Available for both face lift and edge lift applications.
- Features notches for rebar tying.
- An easy to use double bar is available for double insert requirements
- May contribute to LEED® points in green building applications.
Gyro Tilt Plus- Non Directional System
- The Dayton Superior T-49 Gyro Tilt Plus Face Lift Insert is a 3/4” diameter insert manufactured from high quality steel.
- The hot forged head is engaged by the system hardware.
- The insert assembly is complete with plastic void and plastic protected wire base.
- The insert assembly is easily positioned and tied to the rebar mat and requires no special orientation.
- SWL provides a safety factor of approximately 2 to 1 in 2,500 psi weight concrete.
